.. _kernel-installation:

Installation
============

.. contents:: Table of Contents
    :depth: 4
    :backlinks: top

This page provides documentation on how to compile then install the ZOO Kernel on Unix and Win32 platforms.

Obtaining the ZOO Kernel Source
-------------------------------

Use the following command to get the ZOO Kernel source code through Subversion:

::

  svn checkout http://svn.zoo-project.org/svn/trunk zoo-project

For users which get a developer account, use the following:

::

  sed "s:\[tunnels\]:\[tunnels\]\nzoosvn = /usr/bin/ssh -p 1046:g" -i ~/.subversion/config
  svn co svn+zoosvn://svn.zoo-project.org/var/svn/repos/trunk zoo-project

The first line of the instruction above defines a specific tunnel to access the svn server through 
the SSH protocol. Indeed, the ZOO SVN server listens on the 1046 (1024+22) port rather than the default one (22).

Prerequisites
-------------

The following libraries are required on your system before you can install the ZOO Kernel:

- autoconf (  http://www.gnu.org/software/autoconf/ ) 
- cgic (  http://www.boutell.com/cgic )
- cURL (  http://curl.haxx.se )
- FastCGI (  http://www.fastcgi.com )
- Flex & Bison (  http://flex.sourceforge.net/  http://www.gnu.org/software/bison/ )
- libxml2 (  http://xmlsoft.org )
- OpenSSL (  http://www.openssl.org )
- Python (  http://www.python.org )

Optional libraries include:

- PHP Embedded (optional) (  http://www.php.net )
- Java SDK (optional) (  http://java.sun.com )
- SpiderMonkey (optional) (  http://www.mozilla.org/js/spidermonkey/ ) 

Compile libcgic
---------------

The first step is to compile libcgic from the ``zoo-project/thirds`` directory. For such a task, please use 
the following command:

::

  cd thirds/cgic206
  make

Make sure that a ``libcgic.a`` is created in your ``zoo-project/thirds/cgic206`` directory. If yes, then 
you can go to the next step.

On Windows, rather than using the make command, please use:

::

  nmake /f makefile.vc. 
  
.. warning::
   If you don't compile libcgic first, and try to compile the ZOO Kernel, you will get an error such as *cannot find -lcgic*

Unix
----

For Unix users, the ZOO Kernel comes with a GNU autoconf "configure" script that should take care of (hopefully!) 
all compilation issues for you.

The configure script won't work on Windows. See section :ref:`WIN32 <win32>` for details on compiling 
on Windows systems. 

For the impatient
*****************

To build the ``zoo_loader.cgi`` CGI program with the default options, cd to the directory 
where you extracted the ZOO Kernel source code package and use the following commands:

::

  $ cd zoo-kernel
  $ autoconf  
  $ ./configure
  $ make

Unless something went wrong, you should have executables in the current directory for the ``zoo_loader.cgi`` 
CGI program. You can copy the ``zoo_loader.cgi`` program and the ``main.cfg`` file to your HTTP server's CGI 
directory and start using it.

At this step your ZOO-Kernel should work. Nevertheless, don't forget to correct the main.cfg settings 
to set ``tmpPath`` and ``tmpUrl`` to fit your web server configuration.

Configure Options
*****************

Here is the list of available options as returned by *./configure --help*:

::

  --with-gdal-config=FILE specify an alternative gdal-config file
  --with-xml2config=FILE  specify an alternative xml2-config file
  --with-python=PATH      To enable python support or specify an alternative
                          directory for python installation, disabled by
                          default
  --with-php=PATH         To enable php support or specify an alternative
                          directory for php installation, disabled by default
  --with-perl=PATH        To enable perl support or specify an alternative
                          directory for perl installation, disabled by default
  --with-java=PATH        To enable java support, specify a JDK_HOME,
                          disabled by default
  --with-js=PATH          specify --with-js=path-to-js to enable js support,
                          specify --with-js on linux debian like, js support
                          is disabled by default

All the options are described in more details below.

(Required) GDAL Support
^^^^^^^^^^^^^^^^^^^^^^^

If your gdal-config program is not found in your PATH then you can use the 
``--with-gdal-config`` option to specify its location. For instance, let's suppose that your gdal-config 
was installed in /usr/local/bin and this directory is not in your PATH, then you can use 
the following command:

::

  $ ./configure --with-gdal-config=/usr/local/bin/gdal-config

(Required) XML2 Support
^^^^^^^^^^^^^^^^^^^^^^^

If your xml2-config program is not found in your PATH then you can use the 
``--with-xml2config`` option to specify its location. For instance, let's suppose that 
your xml2-config was installed in /usr/local/bin and this directory is not in your PATH, 
then you can use the following command:

::

  $ ./configure --with-xml2config=/usr/local/bin/xml2-config

(Optional) Python Support
^^^^^^^^^^^^^^^^^^^^^^^^^

If you want to activate Python support for the ZOO Kernel then you will have to use the 
``--with-python`` option. If your python-config program is found in your PATH then you 
don't have to specify the path where Python was installed, such as:

::

  $ ./configure --with-python

This assumes that python-config is found in your PATH.

In the case that your python-config is not found in your PATH, then you can specify the Python 
installation directory you are using. For instance, let's suppose that you installed 
Python in /usr/local, then you can use the following command:

::

  $ ./configure --with-python=/usr/local

This assumes that /usr/local/bin/python-config exists.

(Optional) PHP Support
^^^^^^^^^^^^^^^^^^^^^^

To be able to activate PHP support for the ZOO Kernel you'll need to get a local PHP Embedded 
installation; for more information about the required configure options when compiling PHP you 
can refer to this page :

     http://zoo-project.org/trac/wiki/ZooKernel/Embed/PHP

If you want to activate the PHP support for the ZOO Kernel then you will have to use the 
``--with-php`` option. If your php-config program is found in your PATH then you don't have 
to specify the path where PHP was installed, then you can use the following commnd:

::

  $ ./configure --with-php

This assumes that php-config is found in your PATH.

In the case that your php-config is not found in your PATH, then you can specify the PHP installation 
directory you are using. For instance, let's suppose that you installed PHP in /usr/local, 
then you can use the following command:

::

  $ ./configure --with-php=/usr/local

This assumes that /usr/local/bin/php-config exists.

(Optional) Perl Support
^^^^^^^^^^^^^^^^^^^^^^^

If you want to activate Perl support for the ZOO Kernel then you will have to use the 
``--with-perl`` option. If you do not set any value to this option, then the perl program will 
be searched in your PATH. So in such a case, you can use the following command:

::

  $ ./configure --with-perl 

This assumes that perl is found in your PATH.

In the other case, for custom Perl installations, you can set the installation directory. For instance, 
let's suppose that you installed Perl in /usr/local and /usr/local/bin is not in your PATH, 
then you can use the following command:

::

  $ ./configure --with-perl=/usr/local

This assumes that /usr/local/bin/perl exists.

(Optional) Java Support
^^^^^^^^^^^^^^^^^^^^^^^

If you want to activate Java support for the ZOO Kernel then you will have to use the 
``--with-java`` option and set the installation path of your Java SDK. For instance, 
let's suppose that your Java SDK was installed in the /usr/lib/jvm/java-6-sun-1.6.0.22/ directory, 
then you can use the following command:

::

  $ ./configure --with-java=/usr/lib/jvm/java-6-sun-1.6.0.22/

This assumes that the include/linux and jre/lib/i386/client/ subdirectories exist in 
/usr/lib/jvm/java-6-sun-1.6.0.22/, include/linux contains the jni.h headers file and 
jre/lib/i386/client/ contains the libjvm.so file.

.. note:: 
   With Mac OS X you only have to set ``macos`` as the value for the ``--with-java`` option 
   to activate Java support. For example:

   ::

     $ ./configure --with-java=macos

(Optional) JavaScript Support
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

If you want to activate JavaScript support for the ZOO Kernel then you will have to use 
the ``--with-js`` option. If you are using a "Debian-like" GNU/Linux distribution then 
dpkg will be used to detect if the required packages are installed and you don't have to 
specify anything here, so you can use the following command:

::

  $ ./configure --with-js 

This assumes that js_api.h and libmozjs.so are found in default directories.

If you have a custom installation of SpiderMonkey or you are not using a Debian packaging 
system, then you'll have to specify the directory where you installed it. For 
instance, let's suppose that you installed your SpiderMonkey in /usr, then you'll 
have to use the following command:

::

  $ ./configure --with-js=/usr

This assumes that the /usr/include/js exists and contains the js_api.h headers file and 
/usr/lib contains libmozjs.so file.

.. _win32:   

OpenSUSE
********

Zoo-Kernel is maintained as a package in `OpenSUSE Build Service (OBS) <https://build.opensuse.org/package/show?package=zoo-kernel&project=Application%3AGeo>`__. 
This way, rpm's are provided for all versions of openSUSE Linux (11.2, 11.3, 11.4, Factory).

Stable Releases
^^^^^^^^^^^^^^^

For installing Zoo-Kernel in openSUSE there are 3 ways available:

One Click Installer
###################

One-click installer that can be found  `here <http://software.opensuse.org/search?q=zoo-kernel&baseproject=openSUSE%3A11.4&lang=en&exclude_debug=true>`__. 
For openSUSE 11.4 this is the direct `link <http://software.opensuse.org/ymp/Application:Geo/openSUSE_11.4/zoo-kernel.ymp?base=openSUSE%3A11.4&query=zoo-kernel>`__.

Yast Software Manager using a GUI
#################################

The `Application:Geo <http://download.opensuse.org/repositories/Application:/Geo/>`__ repository has to be added 
to the Software Repositories and then Zoo-kernel can be found in Software Management through search.

Command line (as root for openSUSE 11.4)
########################################

::

  zypper ar http://download.opensuse.org/repositories/Application:/Geo/openSUSE_11.4/
  zypper refresh
  zypper install zoo-kernel

Unstable Version
^^^^^^^^^^^^^^^^

The latest development version of ZOO-Kernel can be found in OBS under the project `home:tzotsos <https://build.opensuse.org/project/show?project=home%3Atzotsos>`__. 
ZOO-Kernel packages are maintained and tested there before being released to the Application:Geo repository.

Installation methods are identical as the stable version. Make sure to use `this <http://download.opensuse.org/repositories/home:/tzotsos/>`__ repository instead.

Command line installation (as root for openSUSE 11.4)
#####################################################

::

  zypper ar http://download.opensuse.org/repositories/home:/tzotsos/openSUSE_11.4/
  zypper refresh
  zypper install zoo-kernel
  zypper install zoo-kernel-grass-bridge

Additionally, there is the option of adding the zoo-wps-grass-bridge package. This option will automatically install grass7 (svn trunk).

Try the Installation
^^^^^^^^^^^^^^^^^^^^

- http://localhost/cgi-bin/zoo_loader.cgi?ServiceProvider=&metapath=&Service=WPS&Request=GetCapabilities&Version=1.0.0
- http://localhost/cgi-bin/zoo_loader.cgi?ServiceProvider=&metapath=&Service=WPS&Request=DescribeProcess&Version=1.0.0&Identifier=HelloPy
- http://localhost/cgi-bin/zoo_loader.cgi?ServiceProvider=&metapath=&Service=WPS&Request=Execute&Version=1.0.0&Identifier=HelloPy&DataInputs=a=myname


WIN32
-----

To be written soon ...


